Linear Slide Actuators - Belt Driven
50 Lb. Capacity
50Lbs / 222N Capacity Belt Driven Slide Actuator – Upright Carriage Configuration
Paletti toothed belt driven linear C-track roller-slide actuator systems are ideally suited for your material handling and positioning tasks. This model features the AT10 belt tooth profile for easy tensioning and zero backlash, and POM grade rollers which do not need lubrication. This model to be used in upright configurations only.
| Model | Max Dynamic Load (Lb/N) | Max Static Load (Fz)(Lb/N) | Max Static Load (Fy)(Lb/N) | Static Moment Load (Mz-Yaw)(in-lb/Nm) | Static Moment Load (My-Pitch)(in-lb/Nm) | Static Moment Load (Mx-Roll)(in-lb/Nm) |
|---|---|---|---|---|---|---|
| CTRU50 | 50 / 222 | 90 / 400 | NA | NA | 132 / 15 | NA |
| Max Speed | Pulley Pitch Diameter (mm) | Pulley Torque (in-lb/Nm) | Belt Tensile Strength (Lb/N) | Elongation | Carriage Weight (kg) | |
| 4 m/s | 60.48 | 619 / 70 | 719 / 3200 | .1% @ 800N | 1.5 | |
| *Maximum Acceleration = 19.62 (m/s^2) | ||||||
*Slide table to the left to see more data
The numbers in these dimensional drawings and specification tables represent performance parameters for our standardized models. We can always customize a model more specifically to your application.
Definitions:
Mz-Yaw – certain application stresses might turn the actuator body right or left
My-Pitch – certain application stresses might pull / push the actuator nose upwards or downwards
Mx-Roll – certain application stresses might roll the actuator body right or left
We invite you to review the attached pdf’s and engineering resource links for each model, the engineering link directs customers to our 3D modeling and more detailed performance data. Please contact us anytime for additional information or assistance.
Please Note – contents shown by clicking on the below on-line resources will open in a new browser window. When you are done reviewing those contents, simply close that window to continue with this page.
Common accessories - Fastening Hardware:
The Paletti hardware has been custom engineered specifically for our products, and is quick and simple to use. Our central fasteners are an excellent choice for most corner assembly needs. Our T-Nuts are commonly used in some corner assembly or other assembly needs. Particularly, the push-in T-Nuts are very useful and also offer the benefit of being installed and positioned after the rest of the assembly has been completed and with the option for mounting the assembly to other surfaces.
SV1211V – Central Fastener with anti-rotation, ball spring, and standard material:
https://paletti.shop/en/products/fasteners/central-fasteners-40/sv1211v-central-fastener-svSV1350V – Central Fastener with anti-rotation, ball spring, and stainless material:
https://paletti.shop/en/products/fasteners/central-fasteners-40/sv1350v-central-fastener-sv-stainlessSV2102V – Push-in type T-Nut M8 with ball spring, and standard material:
https://paletti.shop/en/products/fasteners/t-nuts/sv2102v-t-nut-m8-ball-type-push-inSV2106V – Push-in type T-Nut M8 with ball spring, and stainless material:
https://paletti.shop/en/products/fasteners/t-nuts/sv2106v-t-nut-m8-ball-type-push-in-stainlessSV2002V – Slide-In type T-Nut M8 with ball spring, and standard material:
https://paletti.shop/en/products/fasteners/t-nuts/sv2002v-t-nut-m8-ball-type-slide-inSV2003V – Slide-In type T-Nut M8 with ball spring, and stainless material:
https://paletti.shop/en/products/fasteners/t-nuts/sv2003v-t-nut-m8-ball-type-slide-in-s