Linear Slide Actuators - Belt Driven
Single – Multi-Axis Actuators, 10 – 1000 Lbs. Capacities
This video is actually one of our trade show displays featuring two carriages operating on a single rail. Each carriage is driven by a separate belt and a gear-motor from either the top or bottom. When we provide this type of configuration, the carriages are able to function together, opposite one another, or completely independent of one another - all managed by the controls programming.
When high speeds and long travel distances are required, Paletti toothed belt driven linear slide actuator systems are ideally suited for your material handling and positioning tasks. Toothed belt driven linear systems are easy to incorporate into single or multi axis applications and offer long service life with minimal noise and maintenance.
Belt Driven Linear Slide Actuators – Basic Configurations
Upright Carriage configuration – our most commonly used general purpose configuration
Rotated Carriage configuration – can be a very useful configuration when space restrictions limit the traditional upright mounting
Omega configuration – is most commonly used in applications where it is desirable for the motorized carriage position to be fixed, and the rail system then translates
Upright Carriage configuration – our most commonly used general purpose configuration
Rotated Carriage configuration – can be a very useful configuration when space restrictions limit the traditional upright mounting
Omega configuration – is most commonly used in applications where it is desirable for the motorized carriage position to be fixed, and the rail system then translates
Belt Driven Linear Slide Actuators – Special Configurations
Double Guidance configuration
Dual Carriage configuration
Telescoping configuration
Paletti Belt Driven Linear Slide Actuators – Quick Reference Performance Guide
| Model | Carriage Configuration | Max Dynamic Load (Lb/N) | Max Static Load (Fz)(Lb/N) | Max Static Load (Fy)(Lb/N) | Max Speed | Pulley Torque (in-lb/Nm) |
|---|---|---|---|---|---|---|
| BTSU10 | Upright | 10 / 45 | 25 / 110 | 13 / 56 | 2 m/s | 44 / 5 |
| CTRU10 | Upright | 10 / 45 | 36 / 160 | NA | 2 m/s | 44 / 5 |
| CTRU25 | Upright | 25 / 111 | 45 / 200 | NA | 2 m/s | 132 / 15 |
| CTRU50 | Upright | 50 / 222 | 90 / 400 | NA | 4 m/s | 619 / 70 |
| BTRU150 | Upright | 150 / 667 | 450 / 2000 | 875 / 3900 | 8 m/s | 177 / 20 |
| BTRO150 | Omega | 150 / 667 | 450 / 2000 | 875 / 3900 | 8 m/s | 619 / 70 |
| BTRU250 | Upright | 250 / 1112 | 450 / 2000 | 875 / 3900 | 8 m/s | 177 / 20 |
| BTRO250 | Omega | 250 / 1112 | 450 / 2000 | 875 / 3900 | 8 m/s | 619 / 70 |
| BTRU350 | Upright | 350 / 1555 | 450 / 2000 | 875 / 3900 | 8 m/s | 531 / 60 |
| BTRR350 | Rotate | 350 / 1555 | 450 / 2000 | 875 / 3900 | 8 m/s | 531 / 60 |
| BTRO350 | Omega | 350 / 1555 | 450 / 2000 | 875 / 3900 | 8 m/s | 1062 / 120 |
| BTRU450 | Upright | 450 / 2000 | 450 / 2000 | 875 / 3900 | 8 m/s | 1062 / 120 |
| BTRR450 | Rotate | 450 / 2000 | 450 / 2000 | 875 / 3900 | 8 m/s | 1062 / 120 |
| BTRU650 | Upright | 650 / 2890 | 830 / 3700 | 1775 / 7900 | 8 m/s | 1062 / 120 |
| BTRO650 | Omega | 650 / 2890 | 830 / 3700 | 875 / 3900 | 8 m/s | 1062 / 120 |
| BTRU800 | Upright | 800 / 3558 | 830 / 7900 | 1775 / 7900 | 8 m/s | 1062 / 120 |
| BTRR800 | Rotate | 800 / 3558 | 830 / 7900 | 1775 / 7900 | 8 m/s | 1062 / 120 |
| BTSU1000 | Upright | 1000 / 4448 | 2484 / 11050 | 1281 / 5700 | 8 m/s | 1062 / 120 |
*Slide table to the left to see more data
Some additional product advantages with Paletti belt driven slide actuators:
- Single axis through multi-axis configurations
- Internal or External to the rail carriages configurations with either with hardened and ground rollers and rails, or re-circulating ball bearings and rails
- AT10 tooth profile belts with easy tensioning and zero backlash
- Multiple belt material options – pending application needs
- End of carriage covers with lubrication ports and brushes to help keep the rails clean
- Special long-length (20+ feet) models available
- Customizable dimensions available for the carriage
- Options for motor / gear reducer mounts
- Options for mechanical or electronic limits
- Easy to perform maintenance – without removal from the machine
- Single piece carriage and rail construction
- 8mm T-Slot mounting functionality
- Corrosion resistant component options
We invite you to review the subpages for our belt driven actuators. Each actuator subpage showcases our performance specifications, configuration options, dimensional drawings, catalog page pdf, and engineering resource links. And as always…